The lightweight DJI Mini 3 Pro drone receives a 1 / 1.3 “sensor and endurance for 31 to 47 minutes of flight

Company DJI introduced the next generation of small drones Mini 3 Pro. These have traditionally weighed less than 250 grams, which is a common border in many countries for the registration of drones and / or pilots, or other restrictions. The DJI Mini 3 Pro thus weighs less than 249 grams and is only 145 × 90 × 62 mm when folded. In the layout, including the propeller blades, it measures 251 × 362 × 70 mm. We have some very useful improvements here and for example the basic endurance on the Intelligent Flight Battery has increased in 31 to 34 minutes. If you want, you can also buy a larger Plus battery with a 47-minute endurance, but then you have to reckon with the fact that it does not fit in at 250 grams. The drone can thus fly a maximum distance of 18 km, resp. 25 km. The highest flight speed is up to 16 m / s in S mode and can cope with winds of 10.7 m / s.

Another useful change is the camera itself. From the small 1 / 2.3 “12MPx sensor, we got the big 1 / 1.3” 48MPx chip (1.2µm pixels, 2.4µm after merging). It is more than 3 times larger, it can also boast of dual native sensitivity (this technique generally significantly improves results for worse light at higher ISO sensitivities). The 24mm lens (after conversion) also has a significantly improved aperture from F2.8 to F1.7. It is focused from 1 meter to infinity and has an 82.1 ° angle of view. You can take 48MPx or 12MPx images, both JPEG and RAW (DNG) are supported. Sensitivities range from ISO 100 to 6400, times from 1/8000 second to 2 seconds.

DJI Mini 3 Pro

Most will probably be interested in the video. We get support for UHD 4K video (3840 × 2160 pixels) at up to 60p, and this also applies to 2.7K (2720 × 1530 pixels) and Full HD (1920 × 1080 pixels). However, Full HD is also available as slow-motion at 120 fps. A maximum of 30 fps is available in HDR mode. Both MP4 and MOV formats in the H.264i H.265 codec and up to 150 Mbps are supported. The color profile of D-Cinelike can also please you. Interestingly, the camera can be rotated 90 ° and shot vertically, which is suitable for TikTok, YouTube Shorts and more.

DJI Mini 3 Pro driver

We have improved obstacle sensors (forward, backward, below each other) that Advanced Pilot Assistance Systems 4.0 (APAS 4.0) brings, but this does not work at frequencies of 48 fps and higher. There are also various Spotlight 2.0, Point of Interest 3.0 and ActiveTrack 4.0 tracking modes, QucikShots includes Dronie, Helix, Rocket, Circle, Boomerang and Asteroid modes.

DJI Mini 3 Pro driver

Of interest is the possibility to use not only the traditional controller with the help of the phone and the DJI Fly application, but also the new DJI RC controller, which has a built-in 5.5 “touch screen and application, so there is no need for a smartphone. You can also buy a charging hub capable of charging two batteries, a set of ND filters (ND16, 64 and 256) or a 30W USB-C charger that charges the battery in 64 minutes (Plus in 101 minutes).

The basic version of the DJI Mini 3 Pro with a classic remote control costs 829 EUR (20,500 CZK). If you don’t even want the basic driver and you will use the one from the original version, prepare 739 EUR (18,300 CZK). If, on the other hand, you want a set with a new LCD driver, you will need 999 EUR (24,700 CZK). For the Fly More Kit with two basic batteries, a Two-Way Charging Hub, a bag, 2 pairs of blades and a USB-C 3.0 cable, it will cost another 189 EUR (4700 CZK).

Source: Svět hardware by

*The article has been translated based on the content of Svět hardware by If there is any problem regarding the content, copyright, please leave a report below the article. We will try to process as quickly as possible to protect the rights of the author. Thank you very much!

*We just want readers to access information more quickly and easily with other multilingual content, instead of information only available in a certain language.

*We always respect the copyright of the content of the author and always include the original link of the source article.If the author disagrees, just leave the report below the article, the article will be edited or deleted at the request of the author. Thanks very much! Best regards!