Sapphire X080 and X060 mining cards based on RDNA2 architecture are sold to some mining farms.
No official mining card has been introduced by AMD yet. The company’s board partners continue to actively sell GPUs to miners, and these cards are not listed on any manufacturer’s website.
El Chapuzas Informaticoappears to have gained access to two datasheets from Sapphire featuring the GPRO X080 and X060 models. Although the Sapphire GPRO series is mostly known as workstation solutions, these cards may not have much to do with the professional field. The GPRO X080 and X060 are designed for crypto mining, and Sapphire’s own datasheet specifically mentions the unique speeds that can be offered in Etrash:
- Sapphire GPRO X080: 38.0 MH / s @ 165W TGP (default), 41.6 MH / s @ 93W TGP (optimized)
- Sapphire GPRO X060: 27.8 MH/s @ 100W TGP (default), 29.4 MH/s @ 60W TGP (optimized)
The X080 is based on Navi 22 GPU with 2304 Stream Processors clocked at 2132 MHz. In addition, the card has 10 GB of 160-bit GDDR6 memory running at 16 Gbps. The mining card connected to the PCIe Gen 4.0 x16 interface only works on the Linux operating system and has no display port.
The GPRO X060, on the other hand, is based on the Naxi 23 XL GPU with 1792 Stream Processors, and can reach a frequency speed of 2044 MHz. In addition, 8 GB of GDDR6 memory is used with a memory clock of 14 Gbps. Unlike the top model, this graphics card has DisplayPort and HDMI, so it is technically possible to use it in different areas.
According to the source, the X080 is priced at 750 euros and the X060 at 550 euros. The cards will be offered directly to large mining farms, so these cards are not expected to be listed by any retailer. In addition, it should be noted that Sapphire has launched a fanless GPRO X070 model with Navi 10 GPU.
Source: Technopat by www.technopat.net.
*The article has been translated based on the content of Technopat by www.technopat.net. If there is any problem regarding the content, copyright, please leave a report below the article. We will try to process as quickly as possible to protect the rights of the author. Thank you very much!
*We just want readers to access information more quickly and easily with other multilingual content, instead of information only available in a certain language.
*We always respect the copyright of the content of the author and always include the original link of the source article.If the author disagrees, just leave the report below the article, the article will be edited or deleted at the request of the author. Thanks very much! Best regards!