How to program the Star sat receiver after factory reset in the easiest way

How to program the Star sat receiver after factory reset in the easiest way

How to program the Star Sat receiver in detail through the Egypt Brief website. It is difficult for all users to find a way to program the Star Sat receiver because the user needs to follow a certain technology to be able to program it, because this is due to modern technological devices, so programming in this article is this type of Receivers, which have recently taken over the market, are one of the most advanced modern technologies in today’s industries.

How to program a Star Sat receiver in steps

Now you can follow these steps to determine the correct way to program the Star Sat receiver for this event device without any failure, the steps are:

  • You must bring the remote control that came with the receiver device.
  • Click the word arrow in the middle of the remote control.
  • A box will appear asking you to save the password for this recipient, write it down, and then go to the settings below.
  • After typing the password, you need to click on the word manual search or the TB short code, and then click on the word OK.
  • You will be directed to the page containing the satellite options and this list is divided and goes to the satellite selection menu, press the right arrow on the remote control, then make sure to select the satellite on Nilesat and press the OK button.
  • On the left side of the menu in front of you you will find a few other options where you can make sure to switch from selecting all channels to enable or only free and open channels, and you can of course do this by pressing the right arrow.
  • You may notice that there are some sub-options under the previous selection. You can try to press the right button to make sure that the word Cancel is changed to the word Enable, and this happens by pressing the right button of the controller.
  • After completing all these steps, you click on the word search to activate the method of programming the Star Sat receiver.
  • Now you may notice that the signal quality has improved and the boxes used for broadcast and other channels are being searched.
  • All channels on your receiver appear, and a list appears where you press “Yes” to display all the results the receiver found while searching.
  • Now you can wait a few seconds for the receiver to download all the channels it has received.
  • You can now change the names in your receiver settings, change the location of channels, and easily see the channels you want from there without anyone having to do it for you.

Read also here: How to enter a channel frequency in the 2021 HD receiver

How to program a Star Sat receiver after factory reset

One way to program the Star Sat Receiver Immediately after resetting the receiver, just follow the steps below so you can rebuild your channels and from these steps:

  • Click the middle button to go to the main menu.
  • Select the main setup option to access the list of satellites.
  • Select the list of satellites, this option will take you to the list of satellites that your receiver can support.
  • Click on the appropriate satellite for you, then press the word scan until all deleted channels are searched.
  • When you download these channels, a warning message will appear after a few minutes of searching, you press OK and you can see all the channels you want from there.

How to enter a channel frequency in the new Star Sat receiver

It is easy to enter a channel frequency in the Star Sat receiver because the programming method is easy and the method for entering the frequency of this channel is in the following steps:

  • You press the menu button or the menu button.
  • You can now select the “Install or Install” option, and then choose Manual installation or Manual installation.
  • To search for the frequency of a particular channel, switch to another list and try to type that frequency and press the word OK so the receiver can get the command to scan or scan to find that channel.
  • Now you have the channel, you hit the word Save all changes until the channel is loaded into your receiver.

The site suggests Egypt Brief reading: How to organize channels in an HD receiver and install channels without cutting them

How to buy all channels inside Star Sat Receiver

We mentioned earlier that the method of programming the star receiver is very easy, but the method of restoring previously deleted channels is even easier, let’s learn about the steps to restore these channels:

  • Pressing the middle button on the remote control to enter the main menu.
  • Click on upgrade and you can install.
  • Go to another menu and select Upgrade Online.
  • If these channels are already saved, you will of course find the channel list or channel list and download this list from now on.
  • Now you can watch the received channels after downloading them to the star satellite receiver, these channels only have one satellite, but all channels will be received from all satellites.

Features a Star Sat receiver

This receiver is considered one of the latest modern technologies that Nile Satellite Holding Company wants to launch because of the features included, so once you know how to program the StarSat receiver, you have to know its features and technical specifications, which are:

  • This receiver contains a GX processor and is characterized by its high speed and high quality to accommodate the task for as long as possible.
  • It supports many features, the most important of which is Multi Stream.
  • You can run the YouTube app on this receiver as it is built-in.
  • You can connect to your home Wi-Fi using this receiver.
  • You can add additional flash in it.
  • It includes an iptv server and is installed free of charge for up to a month of use.
  • It includes a Forever 126 server used as a key to some encrypted channels and can be used for up to one year and three months from the date of use.
  • Thanks to the built-in DNL feature, you can connect the receiver to your phone and connect to the wireless internet in a very easy way.

We also invite you to learn more in the following ways: How to add a channel to the receiver and how to set it up with simple and easy steps.

Of course, you have now learned the easy way to program a Star Sat receiver, but this made you efficient at home and saved a lot of money to spend on the cannula you were going to bring, so I tried to program this modern technical device for the first time with simple steps

Source: موجز مصر by

*The article has been translated based on the content of موجز مصر by If there is any problem regarding the content, copyright, please leave a report below the article. We will try to process as quickly as possible to protect the rights of the author. Thank you very much!

*We just want readers to access information more quickly and easily with other multilingual content, instead of information only available in a certain language.

*We always respect the copyright of the content of the author and always include the original link of the source article.If the author disagrees, just leave the report below the article, the article will be edited or deleted at the request of the author. Thanks very much! Best regards!