How are harvesters prepared for harvesting?

Harvest season begins. The success of cereals largely depends on the harvest. That is why it is very important to prepare the harvesters so that there are no downtimes.

First of all, it is necessary to perform a complete service on the combine harvester and a detailed inspection. The preparation of the harvester is important for grain quality, because with good maintenance, grain losses can be minimal. The combine is best adapted to changing working conditions. However, a lot also depends on the harvester, who must know everything about setting up and managing the harvester.

Good operation of the machine requires good operation of the heart – the engine. The engine deserves regular maintenance, and special attention should be paid to the radiator. Also, regularly change the oil, oil filter and fuel filter.

Before the actual work, it is necessary to check all the parts, weld and tighten where necessary, do the idle preparation and then start harvesting. Harvesting should not be started with a full header, but the operation should be done gradually. It is precisely on the header that the greatest losses can occur, and in order to prevent them, it is necessary to constantly adjust the motor, which depends on the driving speed, so that it holds the crop during mowing and transfers it to the header table.

Also, it is desirable that every owner of a combine harvester has the necessary spare parts during the harvest.


Source: Bolja Zemlja by www.boljazemlja.com.

*The article has been translated based on the content of Bolja Zemlja by www.boljazemlja.com. If there is any problem regarding the content, copyright, please leave a report below the article. We will try to process as quickly as possible to protect the rights of the author. Thank you very much!

*We just want readers to access information more quickly and easily with other multilingual content, instead of information only available in a certain language.

*We always respect the copyright of the content of the author and always include the original link of the source article.If the author disagrees, just leave the report below the article, the article will be edited or deleted at the request of the author. Thanks very much! Best regards!