Experiment | Cooler Master Caliber R2C gaming chair – Posture and comfort for the gaming position

The Caliber R2C gaming chair focuses on the essentials: comprehensive adjustments for the position, a sturdy structure and materials that reduce heating. Longer gaming sessions are comfortable in this chair without any problems.

Cooler Master Caliber R2C is a gaming chair aimed at active PC gamers at a price of four hundred euros. The special feature of the chair is its heat-reducing materials and structure. Cool-in technology is promised to isolate the heat reflected from the chair and keep the heat a few degrees lower than the basic chair.

The materials of the chair effectively remove body heat. In addition, they reduce moisture, eliminating problems caused by sweating during longer game sessions and when playing in a warm room.

Assembling the chair was verifiably successful even by an 11-year-old. Illustrated instructions and included tools are sufficient for assembly. The operation took about an hour. The most difficult part was attaching the chair part to the leg, but there were no major problems here either

The adjustment possibilities of the chair are very comprehensive. In addition to the gas-damped height adjustment, the inclination of the chair’s backrest can be adjusted from vertical to an almost fully comfortable position. In addition to the height adjustment, the armrests have the option of turning laterally to get a suitable elbow support.

The back of the chair has a lumbar support attached to the straps. Its height adjustment possibilities are extensive, reaching right from the surface of the chair to the shoulders. You can find a suitable position by experimenting when using the chair.

The top of the chair has a removable headrest. Getting it in place is not as precise and sturdy as with lumbar support. In addition, getting a neck support for a 160-centimeter gambler proved to be a challenge, remaining unnecessarily high.

Overall, when sitting in the R2C, you can get a very comfortable position if you find suitable adjustments. The chair works with a mouse and keyboard as well as when playing with a console controller. With entertainment, you can easily tilt the backrest back to a more relaxed position.

The heavy chair does not move in place accidentally when playing. The wheels only work when they are needed when they are pulled out from under the table.

The most pleasant thing about the chair is its materials. The smooth fabric stays clearly cooler than a normal office chair and does not rub like ordinary fabrics or artificial leather covers. Thanks to good ergonomics and sturdiness, the chair is comfortable even when doing remote work.

Caliber R2C is not one of the most affordable gaming chairs, so the added value it brings is worth considering when compared to competitors. If you are looking for a long-term purchase and daily use, R2C is a good option.

The chair’s dirt-repellent and abrasion-resistant materials are guaranteed to please all players and extend the life cycle of the chair. It is also difficult to find room for improvement in the ergonomics of the chair, unless the built-in cup holder is a necessity.

Good

  • Solidity
  • No sanding
  • High-quality and durable materials
  • Adjustment possibilities

Bad

  • Headrest height for smaller players
  • Massive

Technical data Cooler Master Caliber R2C

  • Price: €400
  • Warranty: 2 years
  • Weight: 22 kg
  • Maximum load: 150 kg
  • Height: 126 – 134 cm
  • Backrest: 82 cm
  • Width: 71 cm
  • Color: Grey

Source: Muropaketti.com by muropaketti.com.

*The article has been translated based on the content of Muropaketti.com by muropaketti.com. If there is any problem regarding the content, copyright, please leave a report below the article. We will try to process as quickly as possible to protect the rights of the author. Thank you very much!

*We just want readers to access information more quickly and easily with other multilingual content, instead of information only available in a certain language.

*We always respect the copyright of the content of the author and always include the original link of the source article.If the author disagrees, just leave the report below the article, the article will be edited or deleted at the request of the author. Thanks very much! Best regards!