Car lift for boxes

Car lift for box

And car lift per box, o lift bridge auto if you prefer, is a lifting system for cars very useful to increase the capacity from parking area of a box.

Those who live in large cities, especially in central areas, know perfectly well what it means to find a parking space but this is not the only problem anyway.
You can work around this by purchasing a box.

For an average family, buying one can be one economic effort not indifferent, let alone buy two. In the big cities, in fact, the prices of the boxes are currently skyrocketing.

To give an idea, by calculating the useful space of a parking space which must be at least 5x 2.4 meters for a single seat or of 5 x 4 meters for an average person, such boxes can cost up to 40,000 euros in urbanized areas. 15,000 euros instead in peripheral areas.

Buying a car lift for boxes therefore proves to be a very viable economic solution.

Types of car lift

Depending on available height and width space, personal needs and lifting capacity, there are three on the market tipi from car lifts for boxes suitable for individuals:

  • monocolonna
  • pantograph
  • underground parking with lift

Il single column lift as the name suggests, it is characterized by asingle column lifting.

It turns out to be the best solution if there is little space. Usually these models are equipped with a single-phase motor capable of lifting from 2000 to 2500 kg.

Panero Elevatori single-column car lift

Il pantograph instead it is characterized by the speed of operation since it can pull up a car in less than a minute. It too can lift up to 2500 kg and is more suitable for boxes with ceilings more bassi.

Finally, there are also pit or underground car parks with lift, regulated by the Law 122 Tognoli, perfect alternative to the other two types described above; more expensive but as we will see below, definitely more elegant and functional.

Choice of car lift for boxes

Among the various models there will be various models with different engine powers, so the choice will essentially be made on the weight of their own automobile, obviously net of the available space.

A small-displacement car like one Pandafor example, it can weigh dai 1065 ai 1165 kg of discharge weight. A Jeep Grand Cherokee, on the other hand, can easily go up to 2500 kg and beyond.

Panero Elevatori car liftPanero Elevatori car lift

It is therefore essential to know the weight exact of your own auto or the one that in a possible future, you will intend to buy.

Obviously the various companies will give the customer the possibility of inspections also to understand the actual size of the box and for estimates, so as not to have surprises.

Finally, if the box has sufficient height, it will also be possible to buy a lift with fossa which will hide one of the two cars.

There are various models: with two floors that can also act as a simple car lift for a private individual or three-floor models to be able to store up to 3 cars independently of each other.

This type of car lift is also suitable for outdoor use.

Construction of an underground car park: Law 122 Tognoli

So let’s see what the law number 122 of 1989 and subsequent amendments.

Bps engeneering car pit liftClosed pit car lift

Property owners have the option of setting up in the basement or in the ground floor rooms parking lots. These must be destined for the pertinence of the individual real estate units of the buildings.

They can also be realized also in underground of appurtenant areas outside the property. This provided they do not conflict with the urban plans of traffic and respect i constraints established by the legislation relating to the landscape and the environment.

To start the work you will need the complaint from start of business.
For condominiums, the works must obviously be submitted and approved by the assembly of the condominium.

Volume calculation example

The spaces by and parking lotsaccording to Tognoli law, must be no less than 1 m² for every 10 m³ of construction. So for every 10 m³ of building volume, one m² must be allocated to the parking space.

Piccolo example calculation: suppose we have a house with a volume of 200 cubic meters; if an extension of 30% is carried out, this is equal to 60 m³. The extension is considered a new ergo construction, the space to be allocated to parking is equal to 60/10, or 6 m².

Scissor lift for cars

Now some examples will be proposed thanks to the company Panero Elevatori.
The lifters a pantographthey are none other than gods platforms aerial vertical that allow you to reach raised floors easily and without loading problems.

Pantograph lifterPanero Elevatori pantograph car lifts

They are used a lot in construction sites and in warehouses for lifting goods but in this case they will be used to lift cars.
As mentioned, they are characterized by the extreme rapidity with which they will be able to raise the cars.

An example of the company’s pantograph Panero Elevatori is the following:

  • Operation: electro-hydraulic.
  • Motor type: single phase 220V.
  • Capacity: Kg. 2000 – 2500.
  • Controls: low voltage with “dead man” system with removable key. Wall pushbutton panel.
  • Mechanical safety with automatic insertion.
  • Hydraulic safety: parachute valve and maximum flow control valve.
  • Lifting height: from 0 to 1900 mm with adjustable stop at will.
  • On request useful platform 2000 mm; lifting height up to mm. 2200; platform with removable central sheet.

Obviously all of these products are perfectly suited to norma according to every European directive.

Single column car lifts

Another solution suitable for box Very cramped in width but not in height, it will be the single-column car lift.

Also equipped with single-phase motors, they have a maximum capacity from 2000/2500 Kgeven if some companies also produce more performing ones even if it is unlikely, as we have seen, that a car will weigh more than 2500 kg.

Parkpiù car liftParkPiù car lift

The single-column lift allows you to lift the car occupying only one side of the environment in which it will be installed.

The company Parkpiù S.r.l. proposes a system consisting of a support column fixed al floor on which the lower and upper platforms can slide allowing the actual doubling of garage.

The plant is obviously in accordance with European Norm EN 14010.
The control buttons are located on the supports or on the outside of the access door pillars.

Underground car lifts

Finally the company Bsp Engineering offers car lifts underground for cars very useful for optimize lo space to the best. Usually these systems reach capacities up to 3000 kg.

In addition to doubling the place in the version with driveway roof available, this system, if mounted outside, will also keep the car safe.

Underground car lift bps engineeringBps Engineering underground car lift

This retractable car lift is also suitable for the link from differences in height not exceeding 3.50 meters, useful to avoid the construction of direct access ramps to the place of arrival.

Source: by

*The article has been translated based on the content of by If there is any problem regarding the content, copyright, please leave a report below the article. We will try to process as quickly as possible to protect the rights of the author. Thank you very much!

*We just want readers to access information more quickly and easily with other multilingual content, instead of information only available in a certain language.

*We always respect the copyright of the content of the author and always include the original link of the source article.If the author disagrees, just leave the report below the article, the article will be edited or deleted at the request of the author. Thanks very much! Best regards!