ASRock Rack Company announced motherboards supporting the latest processors AMD EPYC 8004 Sienna in Socket SP6 (LGA 4844) version. Models SIENAD8-2L2T, SIENAD8UD-2L2Q and SIENAD10HM3, designed for building single-socket servers, debuted.
The SIENAD8-2L2T version is made in ATX format. It is equipped with eight slots for DDR5-4800 RAM modules, four PCIe 5.0 x16 slots (including support for CXL1.1) and a PCIe 5.0 x8 slot. There are two M.2 22110/2280 connectors (PCIe 5.0 x4), two 10GbE and 1GbE network ports with RJ45 connectors, as well as a network management port. Plus, two USB 3.2 Gen1 Type-A ports and an analog D-Sub connector are available.
The SIENAD8UD-2L2Q board, in turn, corresponds to the Deep Micro-ATX standard size. There are eight DDR5-4800 slots, two PCIe5.0 / CXL1.1 x16 slots, a PCIe5.0 / CXL1.1 x8 slot, two M.2 22110/2280 connectors (PCIe 5.0 x4), two MCIO connectors (PCIe 5.0 x8 or 8 × SATA-3), three MCIO connectors (PCIe 5.0 x8) and an OCuLink connector (PCIe 3.0 x4). There are two 1GbE RJ45 and 25GbE SFP28 ports, a dedicated network management port, two USB 3.2 Gen1 Type-A ports and a D-Sub connector.
The half-width SIENAD10HM3 model received 10 DDR5-4800 connectors, two Slim Cool Edge PCIe 5.0 x16 slots, two M.2 22110/2280 connectors (PCIe 5.0 x4 or SATA-3), one MCIO connector each (PCIe 5.0 / CXL1.1 x8 or 8 × SATA-3) and OCuLink (PCIe 3.0 x4). There are ASPEED AST2600 and Realtek RTL8211F controllers (dedicated network management port).
Source: 3DNews – все новости сайта by 3dnews.ru.
*The article has been translated based on the content of 3DNews – все новости сайта by 3dnews.ru. If there is any problem regarding the content, copyright, please leave a report below the article. We will try to process as quickly as possible to protect the rights of the author. Thank you very much!
*We just want readers to access information more quickly and easily with other multilingual content, instead of information only available in a certain language.
*We always respect the copyright of the content of the author and always include the original link of the source article.If the author disagrees, just leave the report below the article, the article will be edited or deleted at the request of the author. Thanks very much! Best regards!